This is a set of instructions for creating an internet connection through a
Alltel Bluetooth Cellphone in a Windows Mobile 5 data collector.
Mobile 5.0 Examples: Carlson Surveyor+, Carlson Mini,
Juniper Archer, Juniper AllegroMX, Trimble TSC2, TDS Ranger 500, TDS Recon
!!!WARNING!!! You will need an UNLIMITED data plan on your Cellphone
before using your cellphone to connect to the Internet for using it with
the GPS Reference networks !!!
***Please NOTE: The Alltel Phone has a setting for Internet Connection
that must be set to Bluetooth. The steps below won't work if its set to
USB or CABLE
Turn on the Data Collector
1) Tap Start / Settings / Connections tab / Bluetooth
Turn on BT / Make this device discoverable
tap the Devices tab / tap New Partnership
Bond to phone with passkeys / Choose "Dialup Networking" as the Service
tap FINISH
2) In the Connections Tab = tap the Connections icon
Under My ISP = tap "Add a new Modem Connection"
type in "Alltel" / pick Modem type of "Bluetooth"
tap Next / tap the Device from Step #1 / tap Next
Phn Number = #777
User Name: yournumber@ALLTEL.net
{Replace yournumber with Your ten digit Cellphone Phn Number, Example:
6065550123@alltel.net}
Password: alltel
!NOTE: make sure the username and password are all lower case
Domain = leave it blank
3) Tap Finish
4) Tap Manage Existing Connections / tap and HOLD "Alltel" / tap
Connect
Dialing #777
Returns you to the Connections screen
Exit back out to the Today Screen
5) To disconnect tap the "Double Arrows" in the Upper right
tap Disconnect