This is a rough set of instructions for manually creating a Bluetooth Cellphone connection using Tmobile on a Carlson
Explorer I & II or a Juniper Allegro that is using Socket Bluetooth
!!!WARNING!!! You will need an UNLIMITED data plan on your Cellphone before using your cellphone to connect to the
Internet for using it with the GPS Reference networks !!!
1) Open the Start Menu by tapping the very bottom edge of the Screen -or- hold the CTRL key and tap the ESC Key
a. Tap the blue "B" Icon in the bottom right corner
b. make sure the Bluetooth is turned on
c. Tap the "B" icon / tap Advanced Features / tap My Bluetooth Devices
d. Make sure the box is checked for Connectable
e. Tap comms tab and make sure the Box is checked for Bluetooth Phone
f. Tap OK in the upper right to accept the changes
2) Tap the BT Icon / tap Get Connected / tap Next and follow the prompts to select the Bluetooth Phone and Bond to it
3) Start Menu / Settings / Network and Dialup / tap the Connection pull-down in the Upper Left / tap New / type in
TMOBILE for the name / tap Next
4) Pick Bluetooth Phone from the top of the Pulldown List / tap Next / for the Phone Number enter in the code below then
tap Finish to return to the Network and Dialup window
*99#
5) Tap once on the "TMOBILE" icon we just created / tap Connections / tap Properties
6a) tap Configure / set the Baud Rate in the upper left to "115200"
6b) tap the Call options tab = uncheck the boxes for "Cancel call if not connected" and "Wait for dial tone"
6c) Type in the code below into the "Insert Modem Commands" box
+cgdcont=1,,"internet2.voicestream.com"
then tap OK / tap OK again to return to the Network and Dialup window
!NOTE: This line of code is case sensitive and it needs to be entered in exactly as shown above!
7) double-tap the "TMOBILE" icon
8) tap "Dial Properties" / tap Edit in bottom right / Enter just G in each of the 3 boxes and hit the ENTER key on
keyboard once all 3 boxes have just the letter G in them / tap OK
!NOTE: if you tap the X in the upper right instead of hitting the Enter Key the changes won't save
9) Leave the Username, Password and Domain blank
10) tap Connect
11) It should go to a Status of "Connected" with the choice to Hide. At this point you should be connected to the
Internet