This is a set of instructions for creating an internet connection through an AT&T or Cingular Bluetooth Cellphone in a
Windows Mobile 5 data collector.
Mobile 5.0 Examples: Carlson Mini, Juniper Archer, Trimble TSC2, TDS Ranger, TDS Recon
Turn on the Data Collector
1) Tap Start / Settings / Connections tab / Bluetooth
Turn on BT / Make this device discoverable
tap the Devices tab / tap New Partnership
Bond to phone with passkeys / Choose "Dialup Networking" as the Service / tap FINISH
2) In the Connections Tab = tap the Connections icon
Under My ISP = tap "Add a new Modem Connection"
type in "Cingular" / pick Modem type of "Bluetooth"
tap Next / tap the Device from Step #1 / tap Next
Phn Number = *99#
Username = WAP@CINGULARGPRS.COM
Password = CINGULAR1
Domain = leave it blank
3) Tap the "Advanced" button
Baud = 115200
Uncheck "Wait for Dial tone" / Uncheck "Cancel if not connected"
Extra Dial-string = +CGDCONT=1,"IP","WAP.CINGULAR"
tap OK / tap Finish
4) Tap Manage Existing Connections / tap and HOLD "cingular" / tap Connect
Dialing *99#
Returns you to the Connections screen
Exit back out to the Today Screen
5) To disconnect tap the "Double Arrows" in the Upper right
tap Disconnect