Title: How to Manually Switch Between Batteries in Use, on the Carlson Supervisor Tablet | |
Topic ID: 901 | |
Category: Data Collectors / Carlson Supervisor | |
Modified: 2015-04-15 |
With the Supervisor unplugged from AC power, hold down the F3 button to switch from the current battery to the other battery. This should take place automatically, but can be performed manually by holding down the F3 until you see the LED switch to the other battery and the battery charge status displayed. If the issue appears to be reoccurring, you may wish to reboot the OS of the tablet. When the internal battery gauge does not appear to be correct; remove then, re-install the battery packs. |
|
|
|
|
|
|