This is a rough set of instructions for manually creating a connection using an Enfora GSM 0110 modem with AT&T_Cingular
on an AllegroCX data collector
!!!WARNING!!! You will need an UNLIMITED data plan on your Cellphone before using your cellphone to connect to the
Internet for using it with the GPS Reference networks !!!
PLEASE NOTE: You will need an Enfora GSM 0110 Card with the PCMCIA Adapter from Enfora and you may also need to
purchase a Larger Plastic door for the back of your AllegroCX data collector so it can close with the Enfora card in
place
If the steps below do not work properly - It is recommended you go to www.junipersys.com and install the Latest
Operating System on your AllegroCX {i.e. - 1.07a}
1) Plug your Enfora GSM Card into the larger PCMCIA Adapter that came with it
2) Plug the PCMCIA Card that has the Enfora card in it into the Slot under the Back Cover of the AllegroCX by sliding it
down into place until it is tight
3) Start Menu / Settings / Network and Dialup / tap the File pull-down in the Upper Left / tap New / type in ENFORA for
the name / tap Next
4) Pick "Enfora-GSM0110" from the Pulldown List {If this is not displayed in the list your Enfora Card may not be pushed
in all the way}
6a) tap Configure / set the Baud Rate in the upper left to "115200"
6b) tap the Call options tab = uncheck the boxes for "Cancel call if not
connected" and "Wait for dial tone"
6c) Type in the code below into the "Insert Modem Commands" box
+cgdcont=1,,"wap.cingular"
then tap OK / tap OK when it prompts that the Baud rate has changed
!NOTE: This line of code is case sensitive and it needs to be entered in
exactly as shown above!
7) Tap Next / for the Phone Number enter in the code below then tap Finish to return to the
Network and Dialup window
*99***1#
8a) double-tap the "ENFORA" icon we just created and fill in the User name and Password
with the values below
User Name = WAP@CINGULARGPRS.COM
Password = CINGULAR1
check the box for "Save Password"
8b) tap "Dial Properties" / tap Edit in bottom right / Make sure there is just the letter G in each of the 3 boxes {if
there is different Letters or symbols then delete the existing information and enter in an upper case G for each box /
and hit the ENTER key on keyboard / tap OK}
!NOTE: if you tap the X in the upper right instead of hitting the Enter Key the changes won't save
9) tap Connect
10) It should go to a Status of "Connected" in a few moments with the choice to Hide. You can tap the Hide button.
At this point you should be connected to the Internet