Knowledge Base

Category: Data Collectors / Explorer 600+
Topic ID: 690
Title: Calibration of the Touchscreen of the Explorer 600+ Using the Keyboard
Created: 2011-05-25Last modified: 2011-05-25
To begin the Calibration of the Touchscreen of the Explorer 600+ using the Keyboard:

    
	
  1. Tap the Blue 2nd Function Key then tap the "W" to open the Start Menu.
    2. 
	
  2. Tap the "S" (for Settings) key on the keyboard.
    3. 
	
  3. Tap the "C" (for Control Panel) key on the keyboard.
    4. 
	
  4. Tap the "S" key and then tap the "S" key again to highlight the "Stylus" icon.
    5. 
	
  5. Tap the "S" key and then tap the "S" key again to highlight the "Stylus" icon.
    6. 
	
  6. Tap the "Enter" key.
    7. 
	
  7. Tap the "Tab" key to highlight the "Double-Tap" tab.
    8. 
	
  8. Use the keypad to arrow to the right.  This will highlight "Calibration".
    9. 
	
  9. Tap "Tab" to highlight the "Recalibrate" tab.
    10. 
	
  10. Tap the "Enter" key.
    11. 
	
  11. Follow the on-screen prompts to Calibrate the touchscreen.
    12. 
	
  12. Carefully identify each cross-hair location with the stylus. When the cross-hair disappears, tap the "Enter" key on the keyboard to save your Calibration settings.
    13. 


Now try using the Touchscreen again to see if this resolved the issue.
Links:
Attachments:
Keywords: