Knowledge Base

Installing on the 32MB Allegro CE device can sometime be problematic.  Please use the following guide if you have trouble during the installation process.

1. Before running the install, go to Start/Settings/Control Panel/System/Memory.  Move the slider almost all the way to the right.  

2. Start the install from the PC by double clicking on the SurvCE executable.  

3. When it asks where to put the install, say Yes to accept the DEFAULT location.  (Do NOT say no and select a different directory).

4. When the install is complete, go back to Start/Settings/Control Panel/System/Memory BEFORE attempting to run SurvCE.  Move the memory slider back over to the left.  Not quite all the way, set it 
to about 400-550KB.  The most import thing is that you have about 19MB over on the Program Memory side.  

5. Now go to Start/Programs/Utilities/Save System to save the backup RAM.  You are now ready to run SurvCE.

Please note that you need at least 20,000kb or 20 mb to install version 1.5. If you do not have this memory available please install the 1.21 version of SurvCE.