Category: SurvCE|PC / SurvCE / Quick Start Guides / Carlson Instruments | |||
Topic ID: 1066 | |||
Title: Carlson BRx6+ sensor calibration | |||
| |||
You can click the link below for detailed instructions on calibrating the BRx6 or BRx6+ GPS sensors using SurvCE/SurvPC Version 5.09 or higher: Carlson_BRx6_Sensor Calibration using SurvCE.pdf For a brief 3 page Quick Guide you can click the link below: Carlson_BRx6_Sensor Calibration Quick Guide.pdf To use any IMU feature in SurvCE 5.09 or higher, you will need to tap the Equip tab / tap GPS Rover then tap the Receiver tab and check the "Use IMU" checkbox and set the position rate to 5hz then tap the Green Check. The link below has a detailed PDF document that includes screenshots explaining how to use these Sensors in SurvCE 5.09 and higher: Using IMU - SurvCE v5 QuickStart.pdf | |||
| |||
| |||
|