Knowledge Base

Category: Data Collectors / Carlson Surveyor 2
Topic ID: 986
Title: Carlson Surveyor 2 - Ctrl-C and Ctrl-V patch for copy/paste
Created: 2016-11-09Last modified: 2016-11-09
This procedure is ONLY for the Surveyor2.  DO NOT use this for the Allegro 2.

The attached CAB file "Ctrl-Changes.CAB" makes Ctrl-C, Ctrl-V, and Ctrl-X active on the Surveyor 2; causing it to behave similarly to the previous Surveyor data collector for allowing copy / paste of text.

***Please Note: if you need to completely disable all the "CTRL" hotkeys you can use the attached "Surveyor2_True-Ctrl-Key.CAB" file instead.


1        Download the Ctrl-Changes.CAB, attached below.  Then, save it to a USB/flash drive.

2        Plug the USB/flash into your data collector.

3        From the Windows desktop of the data collector, tap on File Explorer.

4        Use the drop-down, on the upper left, to select Hard Disk.

5        Double-tap the "Ctrl-Changes.CAB" file you downloaded in Step #1 above

6        Follow the prompts to install the CAB to the DEVICE.

7        When the process is complete, reboot the device by hold the power button a few seconds then releasing it when you see the pop-menu.  Tap the "Reset" button to reboot the data collector.
Links:
Attachments:
Ctrl-Changes.CAB
Surveyor2_True-Ctrl-Key.CAB
Keywords: