Knowledge Base

This document describes the process to add Philippine PRS92 Zone projections into Carlson SurvCE/SurvPC 2.5 or higher to use with GPS Equipment.

1) Right-click on link below then click "Save Target As" to download the file "Philippines.csl" to your Desktop or Laptop computer.

Philippines.csl Projection File

2) Copy the Philippines.csl file into the Data folder on your data collector (i.e. - "Program FilesSurvCEData" or "C_DriveData" or "SystemCFData").

3) Run SurvCE or SurvPC on your data collector
4) Tap the Equip tab then tap "Localization"
5) In the System tab, tap the "Edit Projection List" button.
6) Tap the "Add User Defined" button in the bottom right.
7) Tap the "Load File" button on the left.
8) Change the "Type:" pulldown in the top left so it shows "CSL Files".
9) Tap on the "Philippines.csl" file in your Data folder then tap Green Check to open it.
10) Pick the Zone you want to work in from the pull-down list and tap the Green Check to add it to your shorter "Favorites List".
11) Repeat steps 3 through 9 for any other Zones you would like to save in your Favorites list.
12) Tap the Green Check in the upper right to save your Changes