Carlson Software Knowledge Base

Carlson Software Knowledge Base
Downloads KB Home Tech. Support
Search by Keyword
Title: SurvCE 2.62 - Viva Portrait CS10 Alternate Install
Topic ID: 800 Link to this page
Category: Data Collectors / Leica data collectors
Modified: 2013-05-15 Created: 2013-05-15
This is in regards to installing SurvCE Version 2.62 dated Jan. 26th 2013 into a Leica Viva CS10 portrait data collector
if you don't have access to the USB cable for connecting to your computer.

Please follow the steps below to install SurvCE using a Compact Flash memory card:

1) Right-click on the link below click "Save As" or "Save Target As" to save this file as all one piece {1 file} to your
Desktop:

SurvCE_Viva_Portrait.arm.CAB

2) After the download is complete = copy this single file "SurvCE_Viva_Portrait.arm.CAB" from your Computer onto your
compact flash memory card 

3) Insert the Compact Flash Memory card into the Viva CS10 in the back under the battery 
  
4) Power on the Viva CS10 and exit out of SurvCE or SmartWorx to get to the Windows CE screen 
  
5) Double-tap My Device/ double-tap StorageCard / double-tap the SurvCE.CAB file we copied in Step #2 
  
6) Tap OK when it prompts you to Re-Install 
  
7) Tap OK in the Upper right when it gives you a choice where to install it {DO NOT Select any folders or change
anything when prompted for a folder = only tap OK} 
  
8) After the Status Bar finishes you should be able to double-tap the SurvCE Icon then tap Continue Last Job and tap
Equip / then tap About SurvCE to see the Version and check to make sure it has been updated properly

Links:

Attachments:

Keywords: