Knowledge Base

This is in regards to using SurvCE 2.56 or higher with a Satel Satelline Pro Easy 35 watt Base radio to be used with NavCOM 3040 receivers where the Navcom SF3040 Rover is using an Internal UHF Radio.

You can click the link below to download the PDF document:

Navcom SF3040 with Satel Pro Easy35

In our testing we ran the Base Radio at 10 watts at a Frequency of 438.00

This Radio setup with Navcom receivers requires a "Network ID"

***Please note: the current driver for the Satel 3AS radio will set the TX ADDR to OFF and disable communications to the SF3040 internal radio in the GPS Base receiver