Takeoff Estimating Software: R6 / Topcon Fix

February 14th, 2013
tags:    •  
Share

The Issue:

When running the command “Export Topcon TN3 File” in Carlson Takeoff R6 to convert a Carlson surface model into a Topcon one, the command runs all the way through, but no Topcon (.tn3) files are created.

The Fix:

This is a simple issue of the Topcon TN3 and LN3 conversion files are missing from the install. The good news is they can be downloaded here:
http://update.carlsonsw.com/upload/file.php?id=10062&ps=n47ti8idax

To install, unzip and copy these files to the Carlson Takeoff R6\EXEC folder. We will be updating the Takeoff R6 install next.

 

For more tech support articles, visit our Knowledge Base.

takeoff estimating page







« Previous | Home | Next »