| • |
Full data collection inside CAD. |
| • |
Reads/writes
native .DWG format. |
| • |
Plots
points with symbols selected from symbol library. |
| • |
Plots
linework. Field-to-finish is completed in the field! |
| • |
Does
stakeout by point, station and offset, and road template. |
| • |
Works
with all major brands of total stations and GPS equipment. |
| • |
See
your points and linework as you data collect. |
| • |
Ability
to place text on your drawing and contour in the field to verify that
you have taken enough points. |
| • |
Field
is designed for GIS work. It allows the collection of data associated
with valves, manholes, power poles and other standard GIS elements. It
works with affordable, sub-meter accuracy GPS systems from various
manufacturers. |
| |
|
|
|
| |
| • |
Coordinate Systems - Added support for
Great Britain (OSGB-36), Australia (GDA-MGA, AGD84-AMG, AGD84-ISG,
AGD66-AMG, AGD66-ISG), New Zealand (NZGD2000, NZGD49), Puerto Rico
State Plane 83 and France (NTF-GR3DF97A). There is also a new
user-defined datum and projection method. The datum definition consists
of a Helmert 7-parameter datum shift with lookup tables for ellipsoids
and datum shift values. The ellipsoid can also be user-defined. The
user-defined projection supports Transverse Mercator, Lambert Conformal
Conic 1 SP/2 SP, Double Stereographic, Oblique Mercator and Oblique
Stereographic. |
| • |
Geoid Support - Added support for
geoids of Great Britain (OSGM02), Australia (GDA94) and Canada
(CGG2000, HT 2.0, HT 1.01). |
| • |
Coordinate Order - Added the option
whether coordinates are reported in northing-easting or
easting-northing order. |
| • |
Align Local Coordinates – For two
point alignments, added the option for rotate-only where the first
control point is used for translation and the second is used only for
rotation. Added a report function to make a report of the localization
control and GPS reference coordinates. |
| • |
Multiple Measurements – The same point
number can be measured multiple times and the program will average the
coordinates for the point. Before accepting a new measurement, the
program reports the statistics on how the new measurement effects the
average. |
| • |
Pitch Adjustment – For GPS, there is a
new option to calculate the pitch based on the path of GPS positions.
This pitch is then used to correct the position for below the antenna
in Auto Points At Interval, Store Points, Track Position, Centerline
Position and Elevation Difference. This option applies when mounting on
a vehicle like an ATV. |
| • |
Store Point – Added a toggle for “No
Elevation” to create the points at zero elevation. For GPS, there is a
new option to automatically start this routine in continuous read mode.
|
| • |
Stakeout – The screen pick point
option has been improved to allow you to select from different snaps
before picking the point. |
| • |
Field To Finish – Added support for
user-defined special codes such as start/stop and PC/PT. Also
added support for split multiple codes for linework. In Store Point,
there is a new toggle to Join linework to a previous point. |
| • |
Centerline Position – Added an option
to use a profile to report cut/fill. Also added an option to use an
light bar for guiding arrows based on left/right offset. |
| • |
Elevation Difference – Added the
option to use road design and cross section files to define the
surface. These files include centerline, profile, template, section,
superelevation and template transition. The program will calculate the
design elevation for your current position from the road or section
files and report the cut/fill and station/offset. |
| • |
Point Check By Robotic – This is a new
command to automatically take a series of direct-reverse shots to known
coordinates and generate a report of the difference between the known
coordinates and the coordinates calculated from the measurements. |
| • |
GPS Equipment Setup – A text file can
be used for sending multiple commands to the receiver. |
| • |
Ashtech - Added function to reset the
RTK solution. Added a configuration option for whether to enable the
receiver warning beep. |
| • |
InnerSpace – Added support for the
InnerSpace Tech depth sounder. |
| • |
Leica GPS – Added support for using
cell phones for the RTK messaging. |
| • |
Sokkia Laser – Added support for the
Sokkia Contour Laser. True Field-to-Finish! |
| • |
Create
a new drawing or update existing drawings directly in the field. |
| • |
Stake
points by point number or simply pick endpoints or intersections of
entities to stakeout. |
| • |
Cut
& Fill automatically displayed for staked points with elevation or
along any TIN or Grid terrain model. |
| • |
Station
and offset reporting instantly for GPS or for Total Station stored
points along any centerline created and loaded in Carlson Survey. |
| • |
Unlimited
6th field GIS smart prompting for direct storage to a MDB database
table, form or report. |
| • |
Carlson
Field, coupled with Carlson's GIS Module, quickly becomes the true Data
Link that Planning and GIS professionals need and demand. |
| • |
Data
Capture routines from SurvStar into AutoCAD MAP using our GIS Plus
software entirely automate downloading, review/edit collected GIS info
and create or update MDB GIS database tables. |
| • |
All GIS
point data is automatically drawn layerized, with specific corner
symbols, sized with line work using Carlson Software's Field-to-Finish
routine. GIS point data is linked to the database all in one
step. |
| • |
Carlson
Field collects and stores points directly in the AutoCAD DWG
format. |
| • |
Free
Technical Support. |
| |
|
