 |
 |
 |
| CG-GPS |
| |
| Simple,
yet powerful data
collection with
real-time GPS |
| |
| Typically
the handheld unit
for a GPS receiver
is just that. You
still need another
handheld data collector
to do all your
calculations, staking,
cut and fills,
closures, etc.
Instead, we've
put everything
you need on one
handheld data collector,
both CG-FieldPlus and CG-GPS, allowing
you to seamlessly
move back and forth
between conventional
data collection
and using GPS data.
We've also selected
the best handheld
data collectors
available, The
Carlson
Explorer,
Juniper Allegro
and the PSION WorkAbout.
These units are
made for surveyors--rugged,
durable, easy to
use. |
|
| |
| We can interface
with many units,
plus we sell
GPS hardware,
too |
|
|
| |
| Features Include |
| • |
Real-time
GPS. |
| • |
Set
averaging time
for greater accuracy. |
| • |
Status
report shows the
number of satellites
locked onto |
| • |
DGPS
tells you if differential
corrections are
available |
| • |
HDOP
value tells you
immediately if
GPS data is correct. |
| • |
Check
existing control
points with Check
Orientation function
to determine the
orientation accuracy. |
| • |
Store
new points by GPS.
Set the time interval
for coordinate
storage in Stream
Mode. |
| • |
Trace
features while
walking or driving,
storing the points
in the coordinate
file as you go. |
| • |
Save
the orientation
to file to prevent
having to reorient
on subsequent days. |
| • |
Enter
the point number
(or coordinate)
of the point you
wish to find and
the Navigate display
will lead you to
the point. Find
old traverse points,
missing corners,
or control monuments. |
| • |
GPS
status is checked
every time a point
is located, warning
you if data is
marginal. |
| • |
Orientation: |
| |
| • |
Automatic
State Plane
Coordinate
Calculations |
| • |
Orient
to existing
points in the
field. |
| |
| • |
Orient
to up to
ten points
contained
in your
coordinate
file no
matter
what coordinate
system
you are
using (even
assumed). |
| • |
A
least squares
coordinate
transformation
is used
to create
the best
fit to
your existing
coordinate
system. |
| • |
A
full report
allows
you to
determine
the orientation
points
and reorient
if desired. |
|
|
| • |
Read
orientation from
file. |
|
|
|
|
|
|
|
 |
|